Saturday, March 8, 2014

The honey trap they set up to nab Anwar

Yes, there has certainly been an outrage regarding the Court of Appeal’s decision in overturning Anwar Ibrahim’s acquittal on the sodomy charge of two years ago. Some are outraged about the timing, so close to the Kajang by-election that Anwar was supposed to contest and which he can no longer do. Others are outraged that Anwar was found guilty, period, and for only that reason.
Some suspect that this is a conspiracy at the highest level to end Anwar’s political career — and this is the source of their outrage. Why they should be outraged even if this suspicion is true is not explained although ending your opponent’s political career is very much part and parcel of the political game and those within Umno plus within the opposition are also trying to end Prime Minister Najib Tun Razak’s political career.
Then we have Malaysians who are outraged by the way the trial was conducted. To be honest, I did not attend the trial and neither am I a lawyer so I would be out of my depth if I tried to comment about this matter. Nevertheless, what I did notice from afar was that the defence focused on technicalities such as whether the evidence had been tampered with and hence whether the evidence should therefore be disqualified.
Somehow, for whatever reason I am not sure, the Court of Appeal was convinced that the evidence had just been repacked but the seal had not been broken and hence the evidence had not been tampered with. Therefore, according to the Court of Appeal, the trial judge should not have disqualified the evidence, which was where the trial judge had erred in doing so and which resulted in Anwar’s acquittal.
The defence’s strategy was to challenge the prosecution to prove Anwar’s guilt, which is how it should be. The accuser has to prove guilt and not the accused prove innocence. Hence they attacked the validity and credibility of the evidence, which they successfully did and won an acquittal. Prove that Anwar sodomised Saiful, was the route they took.
I believe, earlier on in the trial, the defence said it was going to prove Anwar’s innocence by proving that Anwar had an alibi and was not at the scene of the crime at the time the alleged crime was supposed to have taken place. It was announced that 14 witnesses were going to be called to testify, the condo owner and Anwar’s wife amongst them.
Later they changed their mind and did not call the witnesses after all. And the talk we hear is that the witnesses got cold feet and backed out when the CCTV recording showed Anwar going into the condo at that exact time the crime was supposed to have been committed.
Maybe Anwar’s lawyers should explain this to the public because this type of talk seriously damages Anwar’s case in the court of public opinion. They need to explain why the change of plan regarding the 14 alibi witnesses and whether it is true that they changed strategies after the CCTV tape-recording emerged. And one more thing they need to explain is why Anwar did not take the stand to tell the court that he is innocent. Anwar never testified that he is innocent. He just told the prosecution to prove it if they can.
Then there was Saiful’s colleague Rahimi, who escorted Saiful in his meeting with Najib. Najib at first denied the meeting and then later admitted that the meeting, in fact, did take place. And, more importantly, the meeting occurred before the alleged sodomy act took place.
So the meeting was not just between Najib and Saiful but was in the presence of a third person, Rahimi, who was employed by PKR and worked in PKR’s office. Anwar’s lawyers, in fact, have the video recording of Rahimi’s statement where he related in great detail what was discussed in Saiful’s meeting with Najib.
I know about this video-recorded statement by Rahimi because I was the one who did the video recording. I then handed the original tape recording to Anwar’s lawyer and I kept a copy in my house. Soon after that, the police raided my house and confiscated all my videotapes and detained me under the Internal Security Act.
Hence I know what Rahimi said regarding the meeting between Saiful and Najib, which was witnessed by Rahimi. But neither Najib nor Anwar’s lawyers want to reveal the existence of this videotaped statement by Rahimi. Why?
This is what puzzles me. And the only person thus far who has come to the same conclusion that I have is Singapore’s Lee Kuan Yew when he publicly stated that Anwar is a victim of a honey trap.
Yes, that was what I thought as well. And when Lee Kuan Yew said the same thing that I was thinking I was even more convinced that I was right. And Rahimi’s statement that I personally videotaped (which both Anwar’s lawyer and the Malaysian police have) will support this statement by Lee Kuan Yew. So why has that evidence been kept buried?
I can only suspect that both Anwar’s lawyers plus the police are keeping this evidence hidden because it makes both Anwar and Najib look bad. And Anwar’s lawyer Senator Saiful Izham Ramli can confirm the existence of this videotape because I handed the original to him for safekeeping plus he was there when I did the recording.
And what did Rahimi say? Well, maybe those who possess this video recording can reveal this since the video is in their possession. I was just the cameraman who recorded what Rahimi had to reveal regarding Saiful’s meeting with Najib and what Lee Kuan Yew said was the honey trap they set up to nab Anwar.

Thursday, March 6, 2014

The dark side of 3D printing: 10 things to watch

The dark side of 3D printing: 10 things to watch

The 3D printer is a double-edged sword. It stands to transform technology and society for the better, but we also can't ignore the potential negative consequences. 

darth vader.jpg
This 3D printed Darth Vader might say: "Give yourself to the Dark Side."
 Image: mattk007/Thingiverse
 As with any new technology, it's easy to get swept up in the benefits of 3D printing. It opens up a world of new possibilities for all industries, and stands to lessen transportation costs, environmental impacts, waste, and reliance on corporations by enabling the maker movement.
But 3D printers are still potentially hazardous, wasteful machines, and their societal, political, economic, and environmental impacts have not yet been studied extensively. To make sure you aren't thrown off guard by the conversations to come, we've compiled a list of 10 things you need to know about the dangers and potentially negative impacts of 3D printers.

1. 3D printers are energy hogs

When melting plastic with heat or lasers, 3D printers consume about 50 to 100 times more electrical energy than injection molding to make an item of the same weight, according to research by Loughborough University. In 2009, research at MIT's Environmentally Benign Manufacturing program showed that laser direct metal deposition (where metal powder is fused together) used hundreds of times the electricity as traditional casting or machining. Because of this, 3D printers are better for small batch runs. Industrial-sized 3D printers may not be the answer to lessening our use of coal power any time soon.

2. Unhealthy air emissions

3D printers may pose a health risk when used in the home, according to researchers at the Illinois Institute of Technology. The emissions from desktop 3D printers are similar to burning a cigarette or cooking on a gas or electric stove. The 2013 studywas the first to measure these airborne particle emissions from desktop 3D printers. While heating the plastic and printing small figures, the machines using PLA filament emitted 20 billion ultrafine particles per minute, and the ABS emitted up to 200 billion particles per minute. These particles can settle in the lungs or the bloodstream and pose health risk, especially for those with asthma.

3. Reliance on plastics

ABS_Plastics_SpoolComp-620x412.jpg
ABS plastic filament is the most common material used in 3D printers.
 Image: MakerBot
 One of the biggest environmental movements in recent history has been to reduce reliance on plastics, from grocery bags to water bottles to household objects that can be made from recycled materials instead. The most popular—and cheapest—3D printers use plastic filament. Though using raw materials reduces the amount of waste in general, the machines still leave unused or excess plastic in the print beds. PLA is biodegradable, but ABS filament is still the most commonly used type of plastic. The plastic byproduct ends up in landfills. If 3D printing is going to be industrialized, that byproduct or other recycled plastic needs to be reused.

4. IP and licensing deals

In January, 3D Systems acquired Gentle Giant Ltd., which owned the licensing rights to toy franchises such as The Hobbit, The Walking Dead, Harry Potter, Alien, and Star Wars. Gartnerhas said that companies may lose at least $100 billion in four years to licensing or IP owners. 3D printing will change the business market—and the black market for these items—and the legislation will have to rush to catch up. This potential digital piracy situation is comparable to the way the internet challenged the movie and music industries for copyrights, trademarks, and illegal downloads.

5. Gun control loopholes

The first successful 3D printed gun is old news, but its ramifications are very important. Companies are popping up around the world, attempting to sell these guns and/or the CAD designs for them. Engineering firm Solid Concepts has even fired rounds out of the first 3D printed metal gun. Congress'Undetectable Firearms Act, which bans guns that can't be detected by metal detectors or x-ray scanners, was renewed for 10 years. It left a loophole in the law, however: 3D printed guns with a tiny piece of metal aren't banned by the Act. Legislators are attempting to close that loophole now, after Congress ignored the issue for quite some time, with special requirementsfor printed guns.

6. Responsibility of manufacturers

Weapons can be 3D printed. So can safety equipment such as helmets, wheels for bikes, and toys for small children. Of course there is the issue of intellectual property and trademark, but the larger issue involves responsibility. If a person shoots a gun and harms or kills someone, stabs someone with a 3D printed knife, or breaks their neck while riding on a bike with a 3D printed helmet, who is held accountable? The owner of the printer, the manufacturer of the printer, or the irresponsible person who thought it was a good idea to produce and use an untested product?

7. Bioprinting ethics and regulation

3d_ear.jpg
Cornell bioengineers and physicians created an artificial ear that looks and acts like a natural one.
 Lindsay France/University Photography
 The conversations about the ethics of bioprinting have already begun. Organovo is printing liver cells as well as eye tissue cellsin a partnership with the National Eye Institute and National Center for Advancing Translational Sciences. Scientists have also proposed mixing human stem cells with canine muscle cells to create enhanced organ tissue. Printing cartilage is still the most realistic type of bioprinting, and printing whole organs is still many years away, but 3D printing is growing in medicine quite rapidly. Conversations about the moral, ethical, and legal issues surrounding bioprinting have started, but they will inevitably cause a lot more controversy as it becomes more commonplace.

8. Possibility of 3D printed drugs

Assembling chemical compounds on a molecular level using a 3D printer is possible. A researcher at the University of Glasglow created a prototype of a 3D "Chemputer" that makes drugs and medicine. He wants to revolutionize the pharmaceutical industry by allowing patients to print their own medicine with a chemical blueprint they get from the pharmacy. Of course, this is a very long way off, but it stands to enable DIY chemists to create anything from cocaine to ricin.

9. National security risks

A white paper released from the National Defense Universityhighlighted national security risks from 3D printing technology. Since there will be significant legal and economic implications on the business sector and 3D printers offer the ability to produce a wide range of objects that cannot be controlled yet, the paper noted that there are definitely national security risks that need to be analyzed in the near future.

10. Safety of items that come into contact with food

plates.jpg
Kitchenware is popular to 3D print, but the safety of the materials used is questionable.
 Image: Silverbeam/Shapeways
You can print out a fork or spoon with your MakerBot, but if you use ABS plastic, it is not BPA-free. Luckily, new filaments that are safer to put in your mouth are being created for this specific reason, but they aren't widely available yet. Many 3D printers have spaces where bacteria can easily grow if they aren't cleaned properly, as well. In order to more safely-produced 3D printed food and kitchenware, there may be a need for an FDA-approved machine. People probably don't want to eat genetically-engineered pizza off of toxic plates.

Tuesday, March 4, 2014

Wretched Umno, Mustapha and Taib

 

Wretched Umno, Mustapha and Taib

March 5, 2014
Never in the history of Malaysia has a head of a state acknowledged that Umno is NOT as good as it advertises itself to be.
COMMENT
taib tun mustapha umnoBy  Zainnal Ajamain
COMMENT:  Taib Mahmud stepped down as the Chief Minister of Sarawak after holding the reign for 33 long years. He outlasted Mahathir Mohammad, as the Prime Minister of Malaysia, by more than a decade.
His length as CM speaks volumes of the politician who stayed in office longer than any other leaders in Malaysia and his insight into Umno’s character.
It is interesting to note that never in the history of Malaysia has  a head of a state acknowledged that Umno is NOT as good as it advertises itself to be and that Umno should be rejected from Sarawak.
In his speech to the Parti Pesaka Bumiputera Bersatu (PBB) Supreme Council last month, Taib sat out two prerequisites for his coming successor.
Firstly, Umno must not be allowed to enter Sarawak.  Taib acknowledged that there are vast differences between the people in Sarawak and those from Malaya.
Secondly, his successor must maintain the rights of Sarawak when forming Malaysia which is based on “the Malaysia Agreement 1963, nothing more, nothing less”.
These two fundamentals turned Malaysian politics on its head and may have a far wider and in-depth consequences.
Taib has  every reason to see Umno for what it really is.
Umno has over the years showed that it has become more racist and more intolerant. They bark hate overtones and use words of threats to whoever is against them.
In short they have turned Malaysia into a Fascist state.
As  a responsible and visionary leader in Sarawak, this is a disease Taib does not want to spread in Sarawak.
Callous Umno
Sabah which is Sarawak’s closest neighbour embraced Umno in 1990.
In the process of embracing Umno, the people in Sabah had to sacrifice Usno.
In order for this to happen, its founder and the father of independence for Sabah – Tun Mustapha Harun – had  to demote himself to ‘Timbalan Perhubungan Sabah Umno’.
But after Umno managed to secure its position in Sabah, Tun Mustapha was simply discarded like some dirty old rag into the dustbin of history.
Tun Mustapha died not as Umno member.
His Usno was already dusts and Tun Mustapha was buried as a simple man without the respect due to a leader in Sabah.
This is how ungrateful, churlish and crude Umno is to Sabah and its leaders.
The Barisan Nasional (BN) component parties are just ornaments that Kuala Lumpur will use at their convenience.
It is not about the people’s welfare and their needs. It is only about what Kuala Lumpur needs and what it will take.
This is not a secret and the people in Sarawak are fully aware of this.
The Sarawakians know that if not for Sabah, Umno would have been in the opposition since 1999.
If  not because of Sabah, Umno would have lost in 2008. If not because of Sabah, Umno would have lost in 2013.
Yet even with all the sacrifices, losses, disadvantages and cost, Sabah was never given any special treatment from Umno.
The spineless Umno leaders in Sabah are too cowardly to assert their demands to Kuala Lumpur.
Instead Sabah is treated as if it is a poor pesky distant cousin coming to Kuala Lumpur begging for money even when the money in Kuala Lumpur is actually coming from Sabah.
This is what Najib means when he says Sabah is BN’s ‘fix deposit’  – to be used when needed otherwise left alone to survive on your own.
Alert Malaysians in Sarawak are learning from the mistakes and pitfalls experienced in Sabah.
The Umno, they know is spreading religious bigotry and intolerance. It is spreading hate and is threatening Malaysia with Malay supremacy.
Umno has no empathy, no reasoning and no conscience.
Tomorrow: Taib breaks covert bid to isolate Sabah from Sarawak.
Zainnal Ajamain is a British-trained economist. He has held several senior positions in the government and government think tanks and has worked as a university lecturer, researcher, stockbroker, economist and has published several papers in international media journals. He helped found non-governmental organisation, the United Borneo Front (UBF), and remains active in politics.
Visit fmtborneoplus for extensive coverage on Sabah and Sarawak

Ahead of Allah court case, support for Catholic church pours in

Ahead of Allah court case, support for Catholic church pours in

BY ELIZABETH ZACHARIAH
MARCH 04, 2014
The Catholic church in Malaysia has received overwhelming support from Christian groups around the world, with regards to the right to use 'Allah' in its weekly publication, Herald. - The Malaysian Insider pic, March 4, 2014.The Catholic church in Malaysia has received overwhelming support from Christian groups around the world, with regards to the right to use 'Allah' in its weekly publication, Herald. - The Malaysian Insider pic, March 4, 2014.Support for the Catholic Church continues to pour in from all over the world as it faces the highest court in the country to ask for leave to appeal the ban of the word Allah in its weekly publication, Herald.
Several international groups of different church denominations have come together to express their solidarity and support for the Catholic Church as it prepares to continue its seven-year tussle over the "Allah" word.
The Christian groups, in expressing its support, said they are keeping the country, its Christian community and the authorities in prayer in light of tomorrow's' Federal Court hearing.
In a letter addressed to the Council of Churches Malaysia, the World Communion of Reformed Churches (WCRC) said that any action which compromised on freedom of religion and conscience is an "expression of injustice".
"In that sense, the October 2013 Court of Appeal ruling is problematic and can only serve to escalate conflict and even violence. It is this, that we in the WCRC, want to point out," said its general secretary Reverend Dr Setri Nyomi.
"There are many countries in the world in which Christians and Muslims use the word Allah for God without any conflict.
"As an organisation that has more than 80 million members, operating in 108 countries, the WCRC is very much aware of the values that can be gained in Malaysian Christians and Muslims embracing norms and practices that will make for better peaceful co-existence."
The Baptist World Alliance (BWA) concurred, saying that Christians have used the word Allah for centuries in many parts of the world, including countries with majority Muslims in Southeast Asia.
"We believe that it is not the role of the government to limit or shape religious beliefs, practices or expressions," said BWA general secretary Neville Callam in a similar letter to the CCM.
"These restrictions have led to more conflicts and have become the main obstacles to achieving security, peace, development and prosperity."
The imposition against the church, he added, only serves to undermine Malaysia's reputation as a religiously tolerant and culturally pluralistic country.
"The ban also contradicts the guarantee of freedom of religion to all that is enshrined in Malaysia's constitution," he said.
The Salvation Army (TSA) Singapore, Malaysia and Myanmar territorial commander Colonel Lyndon Buckingham also expressed his concerns on attempts to restrict the use of the word Allah.
"We are also concerned that it will lead to increased tension and polarisation in the country," he wrote in a letter to Malaysian churches.
"We stand in solidarity with the churches in Malaysia, organisations like the Bible Society of Malaysia and other Christians who have become the target of unwarranted and undeserved protests."
They join the World Methodist Council (WMC), the Evangelical Lutheran Church in America (ELCA) and the World Council of Churches (WCC), who had all previously declared their support for the Malaysian Catholic church.
"The Malaysian courts need look no further than neighbouring Indonesia to see that Christians and Muslims refer to God as Allah, without incident or controversy," WMC general secretary Bishop Ivan Abrahams said in a letter last month.
ECLA also said that in Christian communities in the Muslim world and in countries where Arabic words permeate local languages, God has always been referred to as Allah.
"This is not just a matter of faith, but also a reality of history and language.
"It is with great sadness that we witness the burden you bear in the controversy in Malaysia over the use of the word Allah," said ELCA's Bishop Elizabeth Eaton in a letter dated February 5.
WCC general secretary Reverend Dr OlavFykse Tveit said that the shared use of the word Allah, the Arabic word for God, for centuries by Christians and Muslims had built a bridge for interfaith dialogue when speaking of the Divine.
However, the legal precedent in Malaysia, he said, obscured the recognition of this shared heritage and political discourse, referring to the Court of Appeal’s decision last year.
Last October, the court reversed a 2009 High Court decision that overturned the Home Ministry's ban on the use of the word Allah in Herald's Bahasa Malaysia section.
The Catholic Church then filed an appeal against the decision with the Federal Court.
Tension over the "Allah" issue heightened earlier this year after the Selangor Islamic Department raided the Bible Society of Malaysia and seized more than 300 Bibles in Bahasa Malaysia and Iban languages, containing the word Allah.
A Selangor enactment prohibits non-Muslims from using the word, along with 33 other Arabic words. – March 4, 2014.

A Cheap, Promising Way to Filter Water: Through A Twig

Monday, March 3, 2014

Make Fresh Water with 3D Printed Water Distiller

watermaker 3D Printing

Make Fresh Water with 3D Printed Water Distiller

Michael Molitch-Hou BY  ON  · 3D PRINTING, 3DP APPLICATIONS 3 COMMENTS
It’s hard not to be taken in by the humble austerity of the WordPress site Make Fresh Water. Under the simple header reads a phrase that might as well have been written by Kurt Vonnegut as the meaning of life: “Help People.”  The site then lays out, in a simple and straightforward manner, how to solve the right to potable drinking water denied to millions of people on the planet: a 3D printable fresh water maker.
parts 3D Printing
I’m not an engineer or even all that good with science, so we’ll need some help from the peanut gallery as to the viability of this project. Cem Schnitzler has provided the .stl files for his Water Maker and outlines how it works. The device consists of a body, a hopper, and a cap, all of which are to be printed in a UV resistant material. Waste water is placed into the base of the device, the body, which must be printed in black so as to absorb light from the sun. The hopper, printed in a transparent material, is placed over the waste water and sealed with the cap.
steam 3D Printing
Placed in the sun, the Water Maker heats up to 85°C, until steam begins to form, condensing along the inside of the device’s hopper.  The condensed water, with nowhere else to go, streams along the sides of the funnel and into a reservoir lining the edge of the device.  And, as Cem puts it, “That’s it; we have distilled water. But the water needs a little bit of salt because distilled water has no minerals.
water 3D Printing
Finally, there’s a link to a dropbox folder where you can download the files for the Water Maker yourself, accompanied with an impassioned plea: “Now I need your help. Please share this blog with your friends and family. Maybe there is someone how can made this Water Maker and give it to the people in the third world or without access to clean water. I don’t wanna make money with this project ! I do this only with the goal to help people!
According to the UN’s website, “Water scarcity already affects every continent. Around 1.2 billion people, or almost one-fifth of the world’s population, live in areas of physical scarcity, and 500 million people are approaching this situation. Another 1.6 billion people, or almost one quarter of the world’s population, face economic water shortage (where countries lack the necessary infrastructure to take water from rivers and aquifers).” This problem, whichdisproportionately affects developing nations, will soon hit wealthy countries harder as climate change begins to limit access to drinking water with record droughts occurring worldwide. The UN’s site goes on to say, “Water scarcity is both a natural and a human-made phenomenon. There is enough freshwater on the planet for seven billion people but it is distributed unevenly and too much of it is wasted, polluted and unsustainably managed.
All of the above shows that water scarcity is a real problem, but that it is one that can be solved, if we focus our efforts on solving it. Now, Cem has left it up to the world to do something with his design. I’m not sure if it will work, but the blog’s title is instruction enough for those who come across it. Whether his design is the solution or just a solution to the potable water crisis throughout the world, his message is clear: Make Fresh Water.

Nigeria: Christian lawyer receiving death threats for defending victims of Fulani attacks - Where are the Christian state leaders of the World to voice out for the BLOOD of their brethren!

  Nigeria: Christian lawyer in hiding after receiving death threats for defending victims of Fulani attacks Nigeria: Christian lawyer in hid...